-


Rated 4.80 out of 5
$3.00
Universal Handlebar Bracket Strap
- Original Rubber Replacement Adjustment Strap For Use With UNI-BRKT Handlebar Mount
- Quantity: 1
ATTENTION: DO NOT THROW AWAY LEVER PART
In The Event of Strap Breakage, Replacement Straps Do Not Include The Lever. If Thrown Away A Complete Replacement Bracket Assembly Purchase Will Be Necessary.
-


$2.00
Replacement Part – Rubber Grommet
- Fits Simple Pump Heads (with GREY Cap Only) On Models:
- FMP-300
- FMP-500
- FP-200
- TCPG
- Will not work for Air Force T1,T2-T3 PUMPS.
-


$6.00
Replacement Pump Head
- Fits all dual valve pump models:
- FP-35
- FP-50
- FP-55
- FP-100
- FMP-200
- FP-303
- FP-606
- TX-2
- FP-45
-


$5.00
Replacement Helmet Chin Buckle For Serfas® Helmets
Color: Black
Quantity: 1 Set (2 Pieces)
-


$2.00
Replacement Valve For Air Force T1/T2/T3 Floor Pumps:
- Material: Injection Molded Polymer
- Size: 9.4mm Overall Depth, 16.2mm Flange Diameter, 12.6mm Plug Diameter
- Color: Gray
- Quantity: (1)
For Reference, Links Below To View Pumps:
FP-T1 Air Force Tier One Floor Pump
FP-T2 Air Force Tier Two Floor Pump
FP-T3 Air Force Tier Three Floor Pump
Removal: Grasp TVALVECAP body (gray cap marked PRESTA and SCHRADER) with thumb and forefinger. Rotate counterclockwise until separated from threaded head nozzle. TVALVE is located between the cap and head. Upon disassembly TVALVE may be found loosely seated within the removed TVALVECAP or on the threaded head nozzle.
Installation: Insert smaller plug end of replacement TVALVE into head nozzle, flange side out and flush with end of threaded nozzle. Grasp TVALVECAP body with thumb and forefinger and rotate clockwise back onto pump head.
-


$2.00
Replacement Valve Cap For:
- Material: Injection Molded Polymer
- Size: 21.5mm Diameter, 16.3mm Inside Diameter
- Color: Gray
- Quantity: (1)
For Reference, Links Below To View Pumps:
FP-T1 Air Force Tier One Floor Pump
FP-T2 Air Force Tier Two Floor Pump
FP-T3 Air Force Tier Three Floor Pump
Removal: Grasp TVALVECAP body with thumb and forefinger and rotate counterclockwise.
Installation: Grasp replacement TVALVECAP body with thumb and forefinger and rotate clockwise back onto pump head.*
Note: *Be careful not to lose the black rubber TVALVE that goes inside of the cap as this needs to be reinstalled. If your TVALVE has been lost or damaged a replacement may be found here.
-


$8.00
Replacement Part – S-FP200GAUGE12
- Replacement Gauge for FP-200BK Classic Floor Pump Only*
- *For other FP-200 models please see part S-FP200GAUGE
-


$2.00
Replacement Floor Pump Gauge Cover:
- For 2″ Analog Gauge On FP-T1
- Material: Injection Molded Polymer
- Color: Dark Gray
- Quantity: (1)
For Reference, Link Below To View Pump:
FP-T1BK Air Force Tier One Floor Pump
End of content
End of content